Wall cladding

Do it yourself and do it with style… for internal or external feature walls that stand apart - ask us about the latest in fashion colours

Scroll down to view ideas gallery

Panel Style

Freehand Style

Stone colour tones may vary from crate to crate or month to month. All selections should be made in store with this in mind.

 
 

Download Pricelist here

Order or request quote / more assistance now

 
 

Paveset Join Grout

paveset img_5242.jpg img_5090.jpg

Simple sweep in and wet to set.

Use for new or old pavers.

Allowing easy paver removal for:

  • access to water pipes & wires
  • fence/patio posts installations
  • garden design changes
  • extreme stain paver swaps
  • colour matching old sections

Warning! Cracker dust salt issues. Washed white or yellow sand will stain your stone.

Salty cracker dust as a DIRECT TO STONE base, particularly when subjected to moisture can lead to salt attack on your stone. Plasterers sand is recommended as the final 30mm of screed to touch your stone, or as the entire sub-base providing the ground is compacted, edges of paving restrained and the joins remain full so no movement of stone is allowed in any direction.

Use of Paveset or similar grout powder is recommended to ensure a clean, low maintenance and structurally sound finish.

The gaps between all Freo Stone pavers must remain full at all times to preserve the integrity of the stone, its edges and eliminate sand deposits where weeds may grow.

Use of yellow or so called "washed" white river sand is NOT suitable and NOT recommended for use on Freo Stone products. These sands have properties which will permanently stain your paving particularly when left on the surface or wet. These sands will allow weed growth and will wash out over a short time. Yellow sand (e.g. Plasterers) is only suitable for underneath the pavers as a base to install on.

Any installer proposing the use of yellow or white sand is operating outside of our best installation standards which will compromise your warranty.

Professional completion of your grouting now, will ensure the long term beauty and integrity of your project.

Paveset product information sheet.

Paveset material safety data sheet.


Glue

Ardex

Soudall

One tube covers approximately 2.5 Lm of 270mm wide beam. Apply using caulking gun.


Cleaning and Sealing your investment

Whilst most of our products do not require sealing, we simply recommend you engage a professional for cleaning after the installation and construction process. If you do choose to seal our products, the following companies have been found to be successful.

  • Coastline Cleaning and Sealing - Jason - 0404 447 299 (supply or supply & install)
  • Santerra Sealing - Jeff - 0418 989 399 (supply or supply & install)

Please be sure to seal your products with the sealers specified by Freo Stone. Wet look surface sealers will break down over time and require reapplication.

Please note that Crommelin sealers are not compatible with our stone and use will void warranty.

If you choose not to seal your product and do suffer an irreparable stain, the beauty of individual pavers means you can simply contact us for info on how to pull out and replace.</p

 

 

Order or request quote / more assistance now