Deuropave... durable, European engineered porcelain pavers

deuropave-wording-.png

deuropave-product-page-graphic.png

Scroll down to view ideas gallery and technical information.



Download a copy of the Technical Data on Deuropave Here

Paveset Join Grout

paveset-small-ad.jpg img_5242.jpg img_5090.jpg

Simple sweep in and wet to set.

Use for new or old pavers.

Allowing easy paver removal for:

  • access to water pipes & wires
  • fence/patio posts installations
  • garden design changes
  • extreme stain paver swaps
  • colour matching old sections

Washed white or yellow sand will stain your stone.

Use of Paveset or similar grout powder is recommended to ensure a clean, low maintenance and structurally sound finish.

The gaps between all Freo Stone pavers must remain full at all times to preserve the integrity of the stone, its edges and eliminate sand deposits where weeds may grow.

Use of yellow or so called "washed" white river sand is NOT suitable and NOT recommended for use on Freo Stone products. These sands have properties which will permanently stain your paving particularly when left on the surface or wet. These sands will allow weed growth and will wash out over a short time. Yellow sand (e.g. Plasterers) is only suitable for underneath the pavers as a base to install on.

Any installer proposing the use of yellow or white sand is operating outside of our best installation standards which will compromise your warranty.

Professional completion of your grouting now, will ensure the long term beauty and integrity of your project.

Paveset product information sheet.

Paveset material safety data sheet.


Emerseal

emerseal.jpg

One tube covers approximately 2.5 Lm of 270mm wide beam. Apply using caulking gun.